bvhdevelopments's Channelbvhdevelopments's Channel 
   
South Africa's First And Only 2-Stroke Forum  

Username
Password
Register

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Race Fenders
08-08-2011, 04:02 PM (This post was last modified: 08-08-2011 09:08 PM by Bansheesa.)
Post: #1
New Race Fenders
What do you guys think of the new Voltric race cut fenders. The are very similar to Full Bore, but much more affordable.

Let me know what you guys think.

Voltric

Banshee 1 (Trail): 4mm Crank, Mod Trail Port (By BVH), VF3's, DMC 916's, 24cc domes at 1.1mm squish, +4 Timing

Banshee 2 (Play): STD Stroke Cub, Boyesen Reeds, CPI's, 21cc domes at 1.1mm squish, PWK 33's, K&N Pods, +7 Timing, CF1 Rims, Fireball Racing A-Arms, Elka Suspension, Durablue +4, +4 Swing-arm.
Find all posts by this user
Quote this message in a reply
08-08-2011, 07:49 PM (This post was last modified: 08-08-2011 07:56 PM by BVH Racing Developments.)
Post: #2
RE: New Race Fenders
Goeie prys.....

Mix feelings oor die shape.... :-) EK hou glad nie van die full bore shape plastics nie... Agter fender is mooi, maar voor hou ek nie van...

BVH Racing Developments
Pure 2-Stroke PASSION

082 821 45 15


bvhdevelopments@gmail.com

Skype me on bvhdevelopments


2 Chronicles 7:14
Find all posts by this user
Quote this message in a reply
08-09-2011, 12:20 AM
Post: #3
RE: New Race Fenders
Daai voorste stuk wat toe is lyk ietwat soos n eend se bek lol

2011 YZ250F
Find all posts by this user
Quote this message in a reply
08-09-2011, 06:42 AM
Post: #4
RE: New Race Fenders
Hahahahaha eend se bek se jy. Ek stem saam, ek is ni mal oor die front fender...especially the nose piece...
Find all posts by this user
Quote this message in a reply
08-09-2011, 12:34 PM
Post: #5
RE: New Race Fenders
I've always been scheming to make my own C/F version of the front plastic using the original plastics as a plug. Just never have enough time.

I don't like the voltric design.

[Image: copy2.jpg]
Find all posts by this user
Quote this message in a reply
08-09-2011, 01:46 PM
Post: #6
RE: New Race Fenders
Ek sal MAKLIK betaal vir n full set carbon fibre kit.... Kan ons nie so iets op n group buy doen nie... Iemand vir ons n paar stelle maak nie?? Sjoe dit sal darem ongelooflik lyk...

BVH Racing Developments
Pure 2-Stroke PASSION

082 821 45 15


bvhdevelopments@gmail.com

Skype me on bvhdevelopments


2 Chronicles 7:14
Find all posts by this user
Quote this message in a reply
08-10-2011, 12:40 PM
Post: #7
RE: New Race Fenders
few places to check out?
http://www.qualitycomposites.co.za/
http://www.falconsa.com/signsupplies/hex...fibre-cast

whole bunch here too:
http://www.autostart.co.za/cp702434.htm

sticker type, must be quite durable seeing that they do tappet covers:
http://www.pantheraa.co.za/prod01.htm

mmmm a carbon fibre plastic with gold/bronze accents....... yum

Ok lovie, first Daddy will have to chisel the dust off, change the tyres, grease the suspension, drain the tank, clean the carbs, wash it, get super fit and only THEN he can show you how to ride his Banshee!

[Image: wear_it_park_it.jpg]
Visit this user's website Find all posts by this user
Quote this message in a reply
08-10-2011, 01:23 PM
Post: #8
RE: New Race Fenders
o la la... Nou praat jy....!!

BVH Racing Developments
Pure 2-Stroke PASSION

082 821 45 15


bvhdevelopments@gmail.com

Skype me on bvhdevelopments


2 Chronicles 7:14
Find all posts by this user
Quote this message in a reply
08-10-2011, 03:59 PM
Post: #9
RE: New Race Fenders
The 1st one looks good G, it has an inquiry form. Group buy??

[Image: copy2.jpg]
Find all posts by this user
Quote this message in a reply
08-10-2011, 04:43 PM
Post: #10
RE: New Race Fenders
Dit gaan KOS!

Banshee 1 (Trail): 4mm Crank, Mod Trail Port (By BVH), VF3's, DMC 916's, 24cc domes at 1.1mm squish, +4 Timing

Banshee 2 (Play): STD Stroke Cub, Boyesen Reeds, CPI's, 21cc domes at 1.1mm squish, PWK 33's, K&N Pods, +7 Timing, CF1 Rims, Fireball Racing A-Arms, Elka Suspension, Durablue +4, +4 Swing-arm.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)