conrod and crank

[jarrid]

will do my best to get the drawing to look like that for you. as said above i just pust some oil on the parts to stop rust from getting on the parts. as it been very wet in magalies from saterday. will use a diatial verner to measure all.


just two things
1) how i get the EXH and transfer duration degrees?
2) how to teh deck height?

[BVH Racing Developments]

(03-30-2010 12:41 PM)jarrid Wrote:  will do my best to get the drawing to look like that for you. as said above i just pust some oil on the parts to stop rust from getting on the parts. as it been very wet in magalies from saterday. will use a diatial verner to measure all.


just two things
1) how i get the EXH and transfer duration degrees?
2) how to teh deck height?

Don't worry about that... You need to calculate it or use siftware... The deck height you measure, but don't worry about that know....

I also nee conrod lenght from center to center and the bore and stroke.... Google it for that model....